KSLBP 11.1V-2500 11.1V 2500mAh Li-ion Replacement Battery for Konsung Aurora 10 Patient Monitor

Product Specification

• Battery Type: Li-ion (Lithium-Ion)
• Voltage: 11.1V (compatible with 11.1V and 11.5V systems)
• Capacity: 2500mAh / 27.75Wh
• Cell Configuration: 3S1P (3 x 18650 Cells in Series)
• Weight: 500g (1.10 lbs)
• Color: Blue
• Cycle Life: 500+ Charge/Discharge Cycles
• Warranty: 1 Year

Compatible Devices

• Konsung Aurora 10 Patient Monitor (10.4" Display)
• Konsung Aurora 10S Patient Monitor
• Konsung Aurora 8S / Aurora 12S Series (verify physical connector)

Replacement Part Numbers

• KSLBP11.1V-2500
• SL80100-1

Key Features

• Grade A+ Samsung/LG Cells: Built with premium 18650 Li-ion cells for stable voltage output and consistent runtime throughout the entire discharge cycle — critical for uninterrupted patient vital sign monitoring.
• Smart BMS Protection Chip: Integrated Battery Management System with 10-layer real-time protection including over-charge, over-discharge, over-current, short-circuit, over-temperature, over-power, and cell pressure monitoring — ensuring safe operation in clinical environments.
• Precision Voltage Regulation: 11.1V nominal output, fully compatible with both 11.1V and 11.5V Konsung monitor systems. Consistent voltage ensures accurate ECG, SpO₂, and NIBP readings without power-related artifacts.
• No Memory Effect: Li-ion chemistry supports partial charging without capacity loss — ideal for hospital settings where monitors are docked and undocked frequently between patient rounds.
• 500+ Cycle Lifespan: Engineered for high-cycle clinical use, providing years of dependable service before replacement is needed.

Safety Protection (10-Layer BMS)

• Over-Charge Protection: Terminates charging at 12.6V (4.2V per cell) to prevent cell damage and thermal runaway.
• Over-Discharge Protection: Cuts off output at 9.0V (3.0V per cell) to prevent irreversible capacity loss.
• Over-Current Protection: Limits discharge current to safe levels during monitor startup and high-load measurement cycles.
• Short-Circuit Protection: Microsecond-level circuit interruption in the event of output short — eliminating fire and equipment damage risk.
• Over-Temperature Protection: NTC thermistor continuously monitors cell temperature; suspends charge/discharge if temperature exceeds safe limits (typically >60°C).
• Cell Balancing: Active balancing circuit maintains uniform voltage across all 3 cells, maximizing pack capacity and extending service life.
• Over-Power Protection: Prevents excessive power draw that could stress cells or connected equipment.
• Electromagnetic Protection (EMI): Shielded design prevents interference with sensitive ECG and SpO₂ measurement circuits.
• Secondary Over-Voltage Protection: Redundant voltage monitoring as fail-safe backup to primary protection circuit.
• Pressure Protection: Vented cell design with mechanical pressure relief to safely manage internal gas buildup in extreme conditions.

Certifications

• CE Certified — Complies with EU Medical Device Directive safety, health, and environmental requirements
• RoHS Compliant — Free from lead, mercury, cadmium, hexavalent chromium, PBBs, and PBDEs
• UN38.3 Tested — Passes all T1-T8 UN transportation safety tests for lithium batteries (altitude simulation, thermal test, vibration, shock, external short circuit, impact, overcharge, forced discharge)
• MSDS Available — Material Safety Data Sheet provided upon request for hospital procurement and shipping documentation

About Konsung Aurora 10 Patient Monitor

The Konsung Aurora 10 is a multi-parameter patient monitor manufactured by Jiangsu Konsung Bio-medical Science and Technology Co., Ltd. featuring a 10.4-inch high-resolution color TFT LCD display. This versatile bedside monitor provides real-time tracking of essential vital signs including ECG (7-lead), SpO₂ (optional Masimo), NIBP, temperature, and respiration rate. Key clinical features include real-time S-T segment analysis, pacemaker detection, arrhythmia analysis, and incorrect lead placement indication. With built-in WiFi connectivity and optional thermal printer, the Aurora 10 is deployed in ICUs, emergency departments, operating rooms, and general wards across hospitals in China, Southeast Asia, Africa, and Latin America. The KSLBP11.1V-2500 Li-ion battery enables cordless patient transport and ensures uninterrupted monitoring during power interruptions — a critical requirement for continuous patient surveillance in acute care settings.

Installation & Maintenance

• Initial Charge: Charge fully (approximately 3-4 hours) before first use. The LED charge indicator will show solid green when complete.
• Charging: Use only the Konsung-provided charging dock or compatible 11.1V Li-ion medical battery charger. Never use Ni-MH or lead-acid chargers — voltage mismatch will permanently damage the battery.
• Storage: Store in a cool, dry environment (15-25°C / 59-77°F). For long-term storage (over 3 months), charge to 40-60% capacity (approximately 11.4-11.7V) and check every 3 months. Do not store fully discharged.
• Cleaning: Wipe battery housing and contacts with a dry, lint-free cloth. Isopropyl alcohol 70% may be used on housing surfaces — never on electrical contacts or connector pins.
• Replacement Indicator: Replace when runtime drops below 70% of original capacity (approximately 3.5 hours vs. original 5+ hours), or when the Aurora 10 displays consistent low-battery alerts shortly after charging.
• Disposal: Li-ion batteries must be disposed of at certified e-waste recycling facilities. Never incinerate, puncture, or dispose of in general waste. Follow hospital biomedical waste disposal protocols.

FAQ

• Q: Is this an original Konsung battery?
  A: No, this is a high-quality compatible replacement built with Grade A+ Samsung/LG 18650 cells and a 10-layer BMS protection circuit. It meets or exceeds OEM specifications but is not manufactured by or affiliated with Jiangsu Konsung.
• Q: My monitor says 11.5V — will this 11.1V battery work?
  A: Yes. 11.1V and 11.5V are cross-compatible for Li-ion 3S packs. The voltage difference is within the Aurora 10 monitor's acceptable input range (typically 9-12.6V). This battery will function normally without any issues.
• Q: How long does the battery last on a full charge?
  A: Under standard monitoring conditions (ECG + SpO₂ + NIBP every 15 min, display at medium brightness), expect approximately 5-6 hours of continuous cordless operation. Actual runtime varies with parameter load, display brightness, and alarm frequency.
• Q: Does the Aurora 10 charge the battery when connected to AC power?
  A: Yes. When the Aurora 10 monitor is connected to AC mains power via its power adapter, the internal battery charges automatically while the monitor operates. No external charger is required for daily use.
• Q: Will this work with Aurora 8S or Aurora 12S models?
  A: KSLBP11.1V-2500 is designed for the Aurora 10 / 10S. While the Aurora 8S and 12S share the same battery platform, please verify physical connector compatibility before purchasing. Contact us with your model number if unsure.
• Q: What certifications does this battery carry?
  A: CE, RoHS, UN38.3, and MSDS documentation are available upon request to support your hospital's supplier qualification and procurement compliance requirements.

Métodos de envio

Métodos de pagamento

PayPal

Pagamentos via PayPal, não é necessária conta do PayPal. O PayPal é seguro e gratuito para compradores.
Conta PayPal: Payment@batterymall.com
Nome da conta: ShenZhen KingSener Science and Technology Co., Ltd

Cartão de crédito ou débito

VISA, MasterCard, American Express, Maestro & Laser Card, Apple Pay, etc.
O PayPal nunca compartilha suas informações financeiras conosco.

WeChat Pay

Atualmente suporta apenas pagamento via código QR. Entre em contato com o atendimento ao cliente do WeChat e acesse o aplicativo WeChat para escanear o código QR e concluir o pagamento.

Google Pay

Pague com o Google Pay, mais prático e rápido.

Apple Pay

Se você usa um dispositivo Apple, pode usar o Apple Pay para pagar, mais prático e rápido.

Transferência bancária

Se você não puder usar os métodos de pagamento acima e o valor do pedido exceder HK$2000, entre em contato com nosso atendimento ao cliente para obter sua conta bancária e pague por transferência bancária.

Q&A