LG144 Li-ion Replacement Battery for Smith & Nephew RENASYS GO | 510001-144

Product Specification

• Battery Type: Li-ion (Lithium-Ion)
• Voltage: 14.4V
• Capacity: 2600mAh / 37.44Wh
• Cell Configuration: 4S1P (4 x 18650 Cells in Series)
• Dimensions: 65.4 x 34.5 x 47.5mm (2.57 x 1.36 x 1.87 in)
• Weight: 185.2g (6.53 oz)
• Color: White
• Cycle Life: 500+ Charge/Discharge Cycles
• Warranty: 1 Year

Compatible Device

• Smith & Nephew RENASYS GO Negative Pressure Wound Therapy (NPWT) System

Replacement Part Numbers

• LG144
• 510001-144
• Smith & Nephew No.2001584

Key Features

• Grade A+ Li-ion Cells: High-quality 18650 cells deliver stable 14.4V output with consistent capacity, ensuring reliable NPWT pump operation throughout the entire wound therapy session.
• Lightweight & Portable Design: At just 185g, this compact battery maintains the RENASYS GO's portability advantage — patients can remain mobile during post-acute wound care without being tethered to AC power.
• Extended Therapy Runtime: 2600mAh / 37.44Wh capacity provides sufficient power for typical NPWT treatment cycles, allowing uninterrupted negative pressure delivery during patient ambulation and transport.
• No Memory Effect: Li-ion chemistry supports partial discharge and frequent top-up charging without capacity degradation — ideal for clinical settings where the device is charged between patient use.
• Drop-In Replacement: Precision-molded to exact OEM dimensions (65.4 x 34.5 x 47.5mm), ensuring seamless fit in the RENASYS GO battery compartment with secure electrical contact.

Safety Protection

• Over-Charge Protection: Terminates charging at 16.8V (4.2V per cell) to prevent cell over-voltage and thermal runaway.
• Over-Discharge Protection: Cuts off output at 12.0V (3.0V per cell) to prevent irreversible capacity loss.
• Over-Current Protection: Limits discharge current to protect both battery and RENASYS GO pump motor during peak draw.
• Short-Circuit Protection: Instantaneous circuit cutoff to prevent fire, equipment damage, and patient safety risk.
• Thermal Protection: Built-in NTC thermistor monitors cell temperature; suspends operation if overheating detected during charging or extended therapy use.
• Cell Balancing: Active balancing circuit maintains uniform voltage across all 4 cells, maximizing pack capacity and service lifespan.

Certifications

• CE Certified — Complies with EU safety, health, and environmental protection requirements for medical device accessories
• RoHS Compliant — Free from lead, mercury, cadmium, and other restricted hazardous substances
• UN38.3 Tested — Passes UN transportation safety tests (T1-T8) for lithium batteries, including altitude, thermal, vibration, shock, and overcharge tests
• MSDS Available — Material Safety Data Sheet provided upon request for hospital procurement and shipping documentation

About Smith & Nephew RENASYS GO

The RENASYS GO is a portable Negative Pressure Wound Therapy (NPWT) system manufactured by Smith & Nephew, a global leader in advanced wound management. Designed for post-acute care settings, this sleek, lightweight device applies controlled negative pressure to a closed wound environment, continuously evacuating exudates into a disposable canister while promoting granulation tissue formation and wound closure. The RENASYS GO is widely used across home healthcare, skilled nursing facilities, outpatient wound clinics, and hospital post-discharge programs. Its compact size and quiet operation allow patients to maintain mobility and dignity during treatment — the built-in rechargeable LG144 battery is essential to this portability, powering the pump during daily activities, sleep, and transport without tethering patients to wall outlets. A reliable replacement battery is critical for uninterrupted NPWT delivery and optimal wound healing outcomes.

Installation & Maintenance

• Initial Charge: Fully charge the battery (approximately 2-3 hours) before first use. The RENASYS GO charging indicator will signal when complete.
• Charging: Use only the Smith & Nephew-provided RENASYS GO charging dock or compatible 14.4V Li-ion medical device charger. Do not use third-party universal chargers without verifying voltage and polarity.
• Storage: Store in a cool, dry environment (15-25°C / 59-77°F). For extended storage (over 3 months), charge to 40-60% capacity (approximately 15.0-15.4V) and recharge every 3 months to prevent deep discharge.
• Cleaning: Wipe battery housing with a damp cloth using mild detergent if needed. Ensure contacts are dry and free of debris before insertion. Never immerse in liquid or use abrasive cleaners.
• Replacement Indicator: Replace when battery runtime drops noticeably (consistent early low-battery alerts) or the RENASYS GO fails to complete a full NPWT cycle on a single charge.
• Disposal: Li-ion batteries must be disposed of at certified e-waste recycling facilities per local regulations. Never incinerate, puncture, or dispose of in general waste.

FAQ

• Q: Is this an original Smith & Nephew battery?
  A: No, this is a high-quality compatible replacement built with Grade A+ 18650 Li-ion cells and full safety protection circuitry. It is not manufactured by or affiliated with Smith & Nephew.
• Q: Will this fit my RENASYS GO device?
  A: Yes. This battery is precision-molded to exact OEM dimensions and is compatible with all RENASYS GO NPWT devices. It replaces part numbers LG144, 510001-144, and Smith & Nephew No.2001584.
• Q: How long does the battery last on a full charge?
  A: Runtime depends on the NPWT pressure setting and exudate level. Under typical therapy settings (-125mmHg continuous), expect approximately 8-12 hours of operation. Higher pressure or intermittent mode may reduce runtime.
• Q: Can I use the RENASYS GO while charging?
  A: The RENASYS GO is designed for cordless operation during therapy. The battery should be charged using the dedicated charging dock. Always have a spare fully charged battery available for uninterrupted therapy during extended use.
• Q: How does NPWT battery failure affect patient care?
  A: NPWT interruption can lead to exudate pooling, increased infection risk, and delayed wound healing. Having a reliable replacement battery is essential for ensuring continuous negative pressure delivery and optimal clinical outcomes.
• Q: What certifications does this battery carry?
  A: CE, RoHS, UN38.3, and MSDS documentation are available upon request.

Méthodes d'expédition

Méthodes de paiement

PayPal

Paiements par PayPal, aucun compte PayPal requis. PayPal est sûr et gratuit pour les acheteurs.
Compte PayPal : Payment@batterymall.com
Nom du compte : ShenZhen KingSener Science and Technology Co., Ltd

Carte de crédit ou de débit

VISA, MasterCard, American Express, Carte Maestro & Laser, Apple Pay, etc.
PayPal ne partage jamais vos informations financières avec nous.

WeChat Pay

Actuellement, seul le paiement par code QR est pris en charge. Veuillez contacter le service client WeChat et vous rendre dans l'application WeChat pour scanner le code QR et effectuer le paiement.

Google Pay

Payez avec Google Pay, plus pratique et rapide.

Apple Pay

Si vous utilisez un appareil Apple, vous pouvez payer avec Apple Pay, plus pratique et rapide.

Virement bancaire

Si vous ne pouvez pas utiliser les modes de paiement ci-dessus et que le montant de la commande dépasse 2000 HK$, veuillez contacter notre service client pour obtenir votre compte bancaire et payer par virement bancaire.

Q&A