LG144 Li-ion Replacement Battery for Smith & Nephew RENASYS GO | 510001-144

Product Specification

• Battery Type: Li-ion (Lithium-Ion)
• Voltage: 14.4V
• Capacity: 2600mAh / 37.44Wh
• Cell Configuration: 4S1P (4 x 18650 Cells in Series)
• Dimensions: 65.4 x 34.5 x 47.5mm (2.57 x 1.36 x 1.87 in)
• Weight: 185.2g (6.53 oz)
• Color: White
• Cycle Life: 500+ Charge/Discharge Cycles
• Warranty: 1 Year

Compatible Device

• Smith & Nephew RENASYS GO Negative Pressure Wound Therapy (NPWT) System

Replacement Part Numbers

• LG144
• 510001-144
• Smith & Nephew No.2001584

Key Features

• Grade A+ Li-ion Cells: High-quality 18650 cells deliver stable 14.4V output with consistent capacity, ensuring reliable NPWT pump operation throughout the entire wound therapy session.
• Lightweight & Portable Design: At just 185g, this compact battery maintains the RENASYS GO's portability advantage — patients can remain mobile during post-acute wound care without being tethered to AC power.
• Extended Therapy Runtime: 2600mAh / 37.44Wh capacity provides sufficient power for typical NPWT treatment cycles, allowing uninterrupted negative pressure delivery during patient ambulation and transport.
• No Memory Effect: Li-ion chemistry supports partial discharge and frequent top-up charging without capacity degradation — ideal for clinical settings where the device is charged between patient use.
• Drop-In Replacement: Precision-molded to exact OEM dimensions (65.4 x 34.5 x 47.5mm), ensuring seamless fit in the RENASYS GO battery compartment with secure electrical contact.

Safety Protection

• Over-Charge Protection: Terminates charging at 16.8V (4.2V per cell) to prevent cell over-voltage and thermal runaway.
• Over-Discharge Protection: Cuts off output at 12.0V (3.0V per cell) to prevent irreversible capacity loss.
• Over-Current Protection: Limits discharge current to protect both battery and RENASYS GO pump motor during peak draw.
• Short-Circuit Protection: Instantaneous circuit cutoff to prevent fire, equipment damage, and patient safety risk.
• Thermal Protection: Built-in NTC thermistor monitors cell temperature; suspends operation if overheating detected during charging or extended therapy use.
• Cell Balancing: Active balancing circuit maintains uniform voltage across all 4 cells, maximizing pack capacity and service lifespan.

Certifications

• CE Certified — Complies with EU safety, health, and environmental protection requirements for medical device accessories
• RoHS Compliant — Free from lead, mercury, cadmium, and other restricted hazardous substances
• UN38.3 Tested — Passes UN transportation safety tests (T1-T8) for lithium batteries, including altitude, thermal, vibration, shock, and overcharge tests
• MSDS Available — Material Safety Data Sheet provided upon request for hospital procurement and shipping documentation

About Smith & Nephew RENASYS GO

The RENASYS GO is a portable Negative Pressure Wound Therapy (NPWT) system manufactured by Smith & Nephew, a global leader in advanced wound management. Designed for post-acute care settings, this sleek, lightweight device applies controlled negative pressure to a closed wound environment, continuously evacuating exudates into a disposable canister while promoting granulation tissue formation and wound closure. The RENASYS GO is widely used across home healthcare, skilled nursing facilities, outpatient wound clinics, and hospital post-discharge programs. Its compact size and quiet operation allow patients to maintain mobility and dignity during treatment — the built-in rechargeable LG144 battery is essential to this portability, powering the pump during daily activities, sleep, and transport without tethering patients to wall outlets. A reliable replacement battery is critical for uninterrupted NPWT delivery and optimal wound healing outcomes.

Installation & Maintenance

• Initial Charge: Fully charge the battery (approximately 2-3 hours) before first use. The RENASYS GO charging indicator will signal when complete.
• Charging: Use only the Smith & Nephew-provided RENASYS GO charging dock or compatible 14.4V Li-ion medical device charger. Do not use third-party universal chargers without verifying voltage and polarity.
• Storage: Store in a cool, dry environment (15-25°C / 59-77°F). For extended storage (over 3 months), charge to 40-60% capacity (approximately 15.0-15.4V) and recharge every 3 months to prevent deep discharge.
• Cleaning: Wipe battery housing with a damp cloth using mild detergent if needed. Ensure contacts are dry and free of debris before insertion. Never immerse in liquid or use abrasive cleaners.
• Replacement Indicator: Replace when battery runtime drops noticeably (consistent early low-battery alerts) or the RENASYS GO fails to complete a full NPWT cycle on a single charge.
• Disposal: Li-ion batteries must be disposed of at certified e-waste recycling facilities per local regulations. Never incinerate, puncture, or dispose of in general waste.

FAQ

• Q: Is this an original Smith & Nephew battery?
  A: No, this is a high-quality compatible replacement built with Grade A+ 18650 Li-ion cells and full safety protection circuitry. It is not manufactured by or affiliated with Smith & Nephew.
• Q: Will this fit my RENASYS GO device?
  A: Yes. This battery is precision-molded to exact OEM dimensions and is compatible with all RENASYS GO NPWT devices. It replaces part numbers LG144, 510001-144, and Smith & Nephew No.2001584.
• Q: How long does the battery last on a full charge?
  A: Runtime depends on the NPWT pressure setting and exudate level. Under typical therapy settings (-125mmHg continuous), expect approximately 8-12 hours of operation. Higher pressure or intermittent mode may reduce runtime.
• Q: Can I use the RENASYS GO while charging?
  A: The RENASYS GO is designed for cordless operation during therapy. The battery should be charged using the dedicated charging dock. Always have a spare fully charged battery available for uninterrupted therapy during extended use.
• Q: How does NPWT battery failure affect patient care?
  A: NPWT interruption can lead to exudate pooling, increased infection risk, and delayed wound healing. Having a reliable replacement battery is essential for ensuring continuous negative pressure delivery and optimal clinical outcomes.
• Q: What certifications does this battery carry?
  A: CE, RoHS, UN38.3, and MSDS documentation are available upon request.

Métodos de envío

Métodos de pago

PayPal

Pagos con PayPal, no se requiere cuenta de PayPal. PayPal es seguro y gratuito para los compradores.
Cuenta de PayPal: Payment@batterymall.com
Nombre de la cuenta: ShenZhen KingSener Science and Technology Co., Ltd

Tarjeta de crédito o débito

VISA, MasterCard, American Express, Maestro & Laser Card, Apple Pay, etc.
PayPal nunca comparte su información financiera con nosotros.

WeChat Pay

Actualmente solo admite pago con código QR. Por favor, contacte al servicio de atención al cliente de WeChat y vaya a la aplicación de WeChat para escanear el código QR y completar el pago.

Google Pay

Pague con Google Pay, más conveniente y rápido.

Apple Pay

Si utiliza un dispositivo Apple, puede pagar con Apple Pay, más conveniente y rápido.

Transferencia bancaria

Si no puede utilizar los métodos de pago anteriores y el importe del pedido supera los HK$2000, póngase en contacto con nuestro servicio de atención al cliente para obtener su cuenta bancaria y pague mediante transferencia bancaria.

Q&A