ZBA601 / BP-4S 10.8 V Li-ion Battery for Stonex 3D Laser Scanner
This ZBA601 (also labeled BP-4S) is a specialized 10.8 V Li-ion battery pack for the Stonex 3D laser scanner. Built with a 3ICR18/65 cell configuration — three high-drain 18650 cells in series — it delivers the higher operating voltage required by laser scanning instruments. When your scanner is capturing millions of points per second, you need a battery that won't sag under load. This is that battery.
Compatible Models
- Stonex 3D Laser Scanner (battery slot ZBA601 / BP-4S type)
- Compatible with instruments requiring 10.8 V Li-ion battery packs with 3ICR18/65 or 3S1P 18650 configuration
Specifications
| Battery Type | Li-ion (Lithium-Ion) |
| Voltage | 10.8 V (nominal) |
| Capacity | 3400 mAh |
| Cell Configuration | 3ICR18/65 — 3 × 18650 cells in series (3S1P) |
| Model Numbers | ZBA601 / BP-4S / 3ICR18/65 (interchangeable labels) |
| Protection | Over-charge, over-discharge, over-current, short-circuit, and thermal protection |
| Certification | CE, RoHS, UN38.3 |
Key Features
- 10.8 V output — delivers the higher voltage required by laser scanner motors and sensors; not a standard 7.4 V pack
- High-drain capable — the 3ICR18/65 cell configuration handles the current spikes of scanning operations without voltage drop
- Precision-matched cells — all three 18650 cells are capacity and internal-resistance matched for balanced charging and discharging
- Robust BMS — protects each cell individually against over-voltage and under-voltage conditions
- Direct fit — same connector and housing dimensions as the original ZBA601/BP-4S battery pack
What's Included
1 × ZBA601 / BP-4S 10.8 V Li-ion Battery (scanner and charger not included)
Warranty: 12-month replacement warranty. Important: verify your instrument requires 10.8 V before ordering — this is not a standard 7.4 V battery.