If you haven't noticed, the battery in a laptop is not meant to be used forever. You may have realized that you spend hours charging your laptop just to drain the battery in a short time. This is because your battery capacity will decrease over time, so it is different from before.

But there is also good news. The laptop battery can be replaced. Therefore, if you want to know how to install a new battery yourself, this article will show you how to install it.

This guide will help you perform repairs quickly and efficiently so that you can start working again and enjoy the maximum battery life of your device.

The following are the steps you need to perform when replacing the computer battery:

1.Buy a new laptop battery (you can buy it in our store https://www.batterymall.com)
2.Create a battery report in Windows
3.Disconnect the power to the laptop
4.Remove the back panel of the laptop with a screwdriver
5.Remove the old battery
6.Connect the new battery to the laptop body
7.Replace the rear panel
8.Confirm performance with new battery report
let's start.

1. Buy a new laptop battery

Before you consider turning on your computer and starting this process, you first need to order a new battery, which is welcome to buy in our store https://www.batterymall.com. You can find the make and model of your computer yourself to avoid ordering the wrong replacement battery.
Before looking for a new battery online, determine your serial number and which company made your computer. Also, see if you can easily determine the battery's own model and serial number when performing a search.

If you want to know "how much is a laptop battery?" It is important to know that the price will vary depending on the age of your laptop. If you are looking for a replacement battery for an older computer, finding a replacement battery can also be more difficult and costly. We must weigh the cost of replacing the battery with the cost of a new laptop.

2. Create a battery report in Windows

You should understand how the battery performs. The Windows battery report makes this easy. Here is how to generate a report:
1. Click the lower left corner of the screen to bring up the command prompt
2. Enter "powercgg/batteryreport" and press "Enter"
3. The battery status report will be saved
4. Click on your user folder to find and view the battery report
The report outlines the past performance of the battery and an overview of the past three charging cycles. You need to check the design capacity and the full charge capacity to determine whether it is worth replacing the battery.
If there is a big difference between the battery capacity when you turned on the computer and the current battery capacity, it may need to be replaced.

battery

3. Disconnect the laptop's power

This is the simplest step in the process, but it needs to be repeated. In addition to completely turning off the power of the laptop, you also need to make sure that it is disconnected from the power source. Otherwise, you will face a serious risk of electric shock and injury to yourself.

4. Use a screwdriver to remove the back panel of the laptop

Most laptops need to remove the rear panel to replace the battery. This means you may need to buy a #0 Phillips screwdriver or a laptop opening kit, both of which are cheap and can make the process of installing a new battery easier.
There may be some rubber feet on the back panel, you need to remove them before you can access the battery, but it depends on your laptop model. Use a plastic opening tool to pry off the rubber so you can remove the screws that hold the laptop body together.
Use a Phillips screwdriver to loosen the screws on the back panel, and then gently remove the back cover of the laptop. This may require you to use plastic tools again to loosen the edges. It is usually easier to start at the corner and carefully remove the panel, but be careful not to damage the internal components.

5. Remove the laptop battery

Use a Phillips screwdriver to remove the screws that secure the battery to the computer body. After releasing, you need to disconnect the cable connecting the battery to the system. Be careful when doing this, because these components are fragile and damage to them may cause future problems. In addition, make sure to completely remove the battery from the device.
Take the new battery out of the package and make sure that there is no plastic inside. Double check that it is indeed the right battery for your device, so as not to cause any compatibility issues. Put the battery in the slot of the laptop and make sure that it is lined up correctly.

6. Connect the new battery to the laptop body

At this point, you can start the process of connecting a new battery. After inserting the new battery, you need to reverse the steps you just completed to get the computer to restart and run.
Carefully connect the cable on the computer to the new battery
Screw the battery back to the device body
Make sure that the battery is firmly in place, but not too tight, otherwise some components may be damaged

7. Replace the rear panel

Before replacing the back cover with a Phillips screwdriver, align the back cover with the rest of the laptop. Likewise, you have to be careful not to make things too tight or too loose, as any one of them may damage your equipment. If your computer has rubber feet, replace the rubber feet on the bottom of the notebook.

battery

8. Use the new battery report to confirm performance

After arranging everything and putting it back in place, plug the computer into a power source. After charging for a few minutes, turn on the laptop to make sure everything is in order. If your laptop seems to be working properly, you will need to perform another battery report to see what your design capacity is and whether it fully meets your expectations. If so, you can use your laptop again-this time the battery life is normal!
In short
It is not difficult to replace your laptop battery. In addition, you can save time and money when you do it yourself, otherwise you need to take it to the store. However, if you feel that the job is more complicated than you are willing to undertake, or if you are concerned about damaging your laptop, you should consider consulting a professional.

If you haven't noticed, the battery in a laptop is not meant to be used forever. You may have realized that you spend hours charging your laptop just to drain the battery in a short time. This is because your battery capacity will decrease over time, so it is different from before.

But there is also good news. The laptop battery can be replaced. Therefore, if you want to know how to install a new battery yourself, this article will show you how to install it.

This guide will help you perform repairs quickly and efficiently so that you can start working again and enjoy the maximum battery life of your device.

The following are the steps you need to perform when replacing the computer battery:

1.Buy a new laptop battery (you can buy it in our store https://www.batterymall.com)
2.Create a battery report in Windows
3.Disconnect the power to the laptop
4.Remove the back panel of the laptop with a screwdriver
5.Remove the old battery
6.Connect the new battery to the laptop body
7.Replace the rear panel
8.Confirm performance with new battery report
let's start.

1. Buy a new laptop battery

Before you consider turning on your computer and starting this process, you first need to order a new battery, which is welcome to buy in our store https://www.batterymall.com. You can find the make and model of your computer yourself to avoid ordering the wrong replacement battery.
Before looking for a new battery online, determine your serial number and which company made your computer. Also, see if you can easily determine the battery's own model and serial number when performing a search.

If you want to know "how much is a laptop battery?" It is important to know that the price will vary depending on the age of your laptop. If you are looking for a replacement battery for an older computer, finding a replacement battery can also be more difficult and costly. We must weigh the cost of replacing the battery with the cost of a new laptop.

2. Create a battery report in Windows

You should understand how the battery performs. The Windows battery report makes this easy. Here is how to generate a report:
1. Click the lower left corner of the screen to bring up the command prompt
2. Enter "powercgg/batteryreport" and press "Enter"
3. The battery status report will be saved
4. Click on your user folder to find and view the battery report
The report outlines the past performance of the battery and an overview of the past three charging cycles. You need to check the design capacity and the full charge capacity to determine whether it is worth replacing the battery.
If there is a big difference between the battery capacity when you turned on the computer and the current battery capacity, it may need to be replaced.

battery

3. Disconnect the laptop's power

This is the simplest step in the process, but it needs to be repeated. In addition to completely turning off the power of the laptop, you also need to make sure that it is disconnected from the power source. Otherwise, you will face a serious risk of electric shock and injury to yourself.

4. Use a screwdriver to remove the back panel of the laptop

Most laptops need to remove the rear panel to replace the battery. This means you may need to buy a #0 Phillips screwdriver or a laptop opening kit, both of which are cheap and can make the process of installing a new battery easier.
There may be some rubber feet on the back panel, you need to remove them before you can access the battery, but it depends on your laptop model. Use a plastic opening tool to pry off the rubber so you can remove the screws that hold the laptop body together.
Use a Phillips screwdriver to loosen the screws on the back panel, and then gently remove the back cover of the laptop. This may require you to use plastic tools again to loosen the edges. It is usually easier to start at the corner and carefully remove the panel, but be careful not to damage the internal components.

5. Remove the laptop battery

Use a Phillips screwdriver to remove the screws that secure the battery to the computer body. After releasing, you need to disconnect the cable connecting the battery to the system. Be careful when doing this, because these components are fragile and damage to them may cause future problems. In addition, make sure to completely remove the battery from the device.
Take the new battery out of the package and make sure that there is no plastic inside. Double check that it is indeed the right battery for your device, so as not to cause any compatibility issues. Put the battery in the slot of the laptop and make sure that it is lined up correctly.

6. Connect the new battery to the laptop body

At this point, you can start the process of connecting a new battery. After inserting the new battery, you need to reverse the steps you just completed to get the computer to restart and run.
Carefully connect the cable on the computer to the new battery
Screw the battery back to the device body
Make sure that the battery is firmly in place, but not too tight, otherwise some components may be damaged

7. Replace the rear panel

Before replacing the back cover with a Phillips screwdriver, align the back cover with the rest of the laptop. Likewise, you have to be careful not to make things too tight or too loose, as any one of them may damage your equipment. If your computer has rubber feet, replace the rubber feet on the bottom of the notebook.

battery

8. Use the new battery report to confirm performance

After arranging everything and putting it back in place, plug the computer into a power source. After charging for a few minutes, turn on the laptop to make sure everything is in order. If your laptop seems to be working properly, you will need to perform another battery report to see what your design capacity is and whether it fully meets your expectations. If so, you can use your laptop again-this time the battery life is normal!
In short
It is not difficult to replace your laptop battery. In addition, you can save time and money when you do it yourself, otherwise you need to take it to the store. However, if you feel that the job is more complicated than you are willing to undertake, or if you are concerned about damaging your laptop, you should consider consulting a professional.
By lujiaxiang

Share:

Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page